• What is a Ventilation Measurement Proficiency Test?

  Ventilation Validators must successfully complete and pass this Ventilation Measurement Proficiency Test which establishes that they can measure flow rates accurately within NSAI tolerances. Successful completion of this test forms the first stage of the process of becoming an independent validator with the NSAI. WWETB provide the service of testing the equipment and competency to use it. The unit consists of two lines (Line A and B) with a supply and extract valve on each line. Each line contains an UltraLink flow monitor and a fan with 5 speed settings (4-30L/s).

   

  I have read and understand this information:

• Where can I do this test?

  At our NZEB Training Centre in:
  Blackstoops, Old Dublin Road,
  Enniscorthy,
  Co. Wexford,
  Y21 T6V9

   

  I have read and understand this information:

• How long does this test take?

  Each candidate is allocated 45 minutes.

   

  I have read and understand this information:

• What do I need to bring with me?

  • A calibrated anemometer (flow measuring device).
  • If the anemometer does not have a built-in flow straightener, you must have a flow straightener attachment. If you do not know if your anemometer has a built-in flow straightener you should contact the manufacturer/supplier.
  TO BE NOTED: If you do not have any of the above, you will be unable to take the proficiency test.

   

  I have read and understand this information:

• How do I prepare for the test?

  • If you are ordering any equipment, please give yourself ample time to receive this before your test date as well as ample time to familiarise yourself with the use of your equipment.
  • The anemometer you use during testing must be the anemometer you will be using for validation. A record of the serial number of the anemometer will be taken by the assessor on the test day.
  • Your anemometer should be configured in accordance with the manufacturer’s guidelines.
  • The exam proctor will not assist you in configuring your equipment. It is your responsibility to configure your equipment correctly and be competent in its use.
  • WWETB has been informed that some makes and models of anemometers are due software updates. It is the responsibility of each candidate to ensure that software updates, Factors and all settings are current and up to date before undertaking the assessment.

   

  I have read and understand this information:

• What mode of air flow measurement is used for the test?

  All measurements are recorded in litres per second.

   

  I have read and understand this information:

• How much does the test cost?

  The cost of testing is €150.00 per anemometer. This fee must be paid in advance. You will be contacted by a staff member to arrange payment in advance.

   

  I have read and understand this information:

• How many units can I test?

  If you wish to be deemed proficient in the use of more than one anemometer you will have to book a separate time slot for each and pay €150.00 fee for each.

   

  I have read and understand this information:

• How do I book a test?

  Email nzeb@wwetb.ie or register for the test online at www.fetchcourses.ie. You must create an account on Fetch Courses with your Irish PPS number to apply for this test. If you do not have an Irish PPS number, please contact nzeb@wwetb.ie for registration information.

   

  I have read and understand this information:

• What is the next step if I am unsuccessful on the day?

  You can rebook to the next available test date. You will be required to pay the test fee again if you wish to rebook.

   

  I have read and understand this information:

• If I pass the test, when can I expect to receive my certification?

  You can expect to receive certification within 4-6 weeks of the test date.

   

  I have read and understand this information:

• How do I cancel my test?

  If you need to cancel your booking, you must give 3 working days notice from the test date, if not, you will be required to pay the test fee again if you wish to rebook.

   

  I have read and understand this information:

• What result is required to pass the test?

  All readings must be within the NSAI tolerances noted on the exam brief. If a measurement is outside the tolerance, you will be given an opportunity to repeat the reading up to 3 times. Maximum repeat on 3 different readings. The Proficiency test is a pass/fail test.

   

  I have read and understand this information:

Before your test will be confirmed you are required to complete the form below to confirm that you have read and understood the above information.